Open Bowl Scrapers Designed for More Productivity

Sequence Assist

automates as many as 14 individual implement commands into button clicks. Inexperienced operators get help with speed and accuracy; more experienced operators are less fatigued and more engaged with site efficiency.

Load Assist 

controls the cutting edge during loading, which simplifies the process. In the past the typical learning curve for a scraper operator was about three months. With Load Assist, they can be operational in about a week. For more experienced operators, the feature can be disabled.
Other advanced features include:

• Tire Spin Reduction: A standard feature that when tire slippage is sensed will automatically reduce engine rpms and vary them to bring slip into an acceptable range. This feature better controls tire wear and cost.
• Advanced Tire Spin Reduction: This optional upgrade adds GPS and software to enhance Tire Spin Reduction, allowing the system to control slip from the beginning cut to the end.
• Payload Estimator: Calculates payload by measuring bowl-lift-cylinder pressure at the start of the haul segment. The system works best in tandem with Sequence Assist and achieves better than 95 percent accuracy compared with actual scale weights.
• Cat GRADE: According to Caterpillar 40 to 50 percent of scrapers leave the factory equipped with Cat GRADE, a Cat Connect technology. Cat GRADE helps operators avoid overfilling and overdoing the cut—the most common inefficiencies in this type of earthmoving.

Get all the details on these scrapers from your Cat dealer or visit http://www.cat.com/en_US/products/new/equipment/wheel-tractor-scrapers/open-bowl-scrapers.html.