Turning on Your Excavator 360-Degree Camera View

If you opted to have the four camera, 360-degree view technology factory installed on your machine, this video is for you. In this quick guide, we show you how to use this visibility feature. 

HOW DOES 360-DEGREE VIEW WORK? [00:15] 

1. Four cameras are mounted around the machine. The cameras are in the front and rear, and on the right side and left side of your excavator. 

2. See the view from each camera separately, or combine them as a split screen or into the 360-degree view mode.  

3. Use the monitor to cycle through the different views. 
   
   

TURNING ON 360-DEGREE CAMERA VIEW [01:03] 

1. Press the menu button on the home screen and select 360-degree visibility. It takes a few seconds to activate. 

2. To turn off the combined view, press the menu button and toggle off 360-degree visibility. 

For best visibility and safety, be sure to keep cameras clean. Wash them with a damp cloth or high-pressure spray. When cleaning, observe safety procedures and maintain three points of contact with the machine at all times. 

Remember: Always refer to your Operation and Maintenance Manual for guidance on maintenance, safety, settings, features and more. 

Have any questions about using the excavator 360-degree camera view after watching the video? Reach out to your Cat^® dealer, who can make sure you are getting the most out of your machine.