Marine Generator Sets C32 ACERT Tier 3

Product Specifications for C32 ACERT Tier 3

C32 ACERT Tier 3 Standard Equipment

AIR INLET SYSTEM

• Separate circuit after-cooled (SCAC)

• Turbocharger, jacket water cooled

• Turbocharger inlet, 152 mm (6 in) OD straight connection

CONTROL SYSTEM

• If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer

• Electronic diagnostics and fault logging

• Engine Protection Mode for extended ambient conditions

• Electronic fuel/air ratio control

COOLING SYSTEM

• Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines

• Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines

• SCAC pump, gear driven

• Jacket water pump, gear driven

• Sea water pump, bronze impeller, gear driven, for HEX cooled engines only

• Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard

• 4 Bolt ANSI Flange Connection

• Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)

• Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection

• SCAC and JW shunt tanks for maintaining proper Pump inlet pressures

EXHAUST SYSTEM

• Water-cooled exhaust manifold & turbocharger

• 4 Bolt 130 mm (5.12 in) diameter flanged outlet

FLYWHEELS & FLYWHEEL HOUSINGS

• Flywheel Housing, SAE No. 0

• Flywheel, 18 inch, 136 teeth

• SAE standard rotation

FUEL SYSTEM

• Duplex Fuel Filters, Spin-on, RH service

• Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)

• Plate-type fuel cooler installed behind Aftercooler Shunt Tank

• Fuel transfer pump, gear driven

• Manual fuel priming pump

GENERATORS AND GENERATOR ATTACHMENTS

• SR5 form wound

• 2 roller bearings

• Permanent magnet excitation

• 4 pole, 6 leads, Series Star connected

• Caterpillar's Digital Voltage Regulator (CDVR)

• Marine Class H insulation, Class F temperature rise

• Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings

• Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts

• IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)

• System IV insulation for harsh environment protection

LUBE SYSTEM

• Simplex oil filters, RH service

• Deep sump oil pan

• RH service oil filler locations

• RH service dipstick

• Oil pump, gear driven

MOUNTING SYSTEM

• Formed C-channel rails, 300mm (11.81in) height

• Six shipped loose combined helical spring/rubber

• isolators for installation below package base

GENERAL

• Front Damper guard

• Common electrical bondng point on HEX and KEEL cooled engines

C32 ACERT Tier 3 Optional Equipment

ALARM AND PROTECTION

• Remote panels

• MCS Controller

• Power analyzer module

• Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors

EXHAUST SYSTEM

• Dry Elbows

• Flexible Fitting

• Flange

• Muffler

• Muffler Spark Arresting

• Rain Cap

AIR INLET SYSTEM

• Air Inlet Cleaner

• Closed Crankcase Ventilation

• Air inlet adapter

CHARGING SYSTEM

• Battery Chargers, Charging Alternators

CONTROL SYSTEM

• Load Sharing Attachment

FUEL SYSTEM

• Water Separator

LUBE SYSTEM

• Duplex Oil Filters, Sump Pump

PROTECTION SYSTEM

• Fuel and Oil Shielding

STARTING SYSTEM

• Electric Starting Motors - Single 24 Volt

• Air Starting Motor

• Dual Starting Motors (Electric and Air)

• Air Start Accessories

• Starting Aids - JW Heaters

• Battery Sets - 24 Volt - Dry